Pura Twin Concealed Thermostatic Shower Valve With Built-in Diverter With Fixed Head And 4 Body Jets

An attractive square chrome face plate and minimalist controls ensure that the Tec Pura Twin Concealed Thermostatic Shower Valve, with Built-In Diverter, complements any modern bathroom or shower room. Constructed from brass, with modern ceramic disc technology, cross head and lever handles give you finger tip control of the temperature and flow of water to either the fixed shower head or 4 body jets.

Safety comes as standard with a pre-set maximum temperature and an anti-scald device.

Hudson Reed Tec Pura Twin Concealed Thermostatic Shower Faucet Valve Details

• Dimensions (H x W): 8½" x 4¾"
• Durable, dependable and with the luxury of a solid brass shower valve
• Brass handles and face plate
• Chrome finish
• Ceramic Disc Technology
• Pre-set maximum temperature (38°)
• Automatic anti scald device
• Suitable for water systems between 2 - 75 psi pressure
• ½" NPT Inlets and Outlets Compatible with standard US plumbing connections
• Suitable for combi boilers, gravity fed systems, unvented mains pressure systems and for shower pumps
• Please note: This valve can supply only one outlet at a time

Hudson Reed Chrome Fixed Shower Head Details

• Width: 11.8"
• Depth: 13.4"

Hudson Reed Chrome Body Jet Details

• Dimensions: 1.75”(H) x 1.75”(W)
• Projection from wall : 2.16”

• Accurate flow control.


• Thermostatic control to + / - 1 degree, even if the water pressure fluctuates.


• Full thermal protection to prevent scalding in the event of hot or cold water shut off.


• In the event of hot or cold water failure, the valve will shut down within 1.5 seconds.


• The patented cartridge is highly resistant to calcium build up - even in hard water areas.


• Our valves are suitable for use with all systems: gravity fed, pumped, unvented high pressure or fully modulated combi-boilers.


• Excellent flow rates - even at low pressure. Our valves can deliver 8.8 litres per minute at 2 psi pressure.


• The cartridge is fully reversible, meaning if hot and cold supplies are wrong way round it doesn't need re-plumbing. Simply remove cartridge, turn 180° and replace.